Inspection And Replacement Of The Desiccant; Inspection And Replacement Of Batteries - Xylem emnet BLU-X Radar B Service Manual

Table of Contents

Advertisement

DRAFT – CONFIDENTIAL – NOT FOR DISTRIBUTION

11.4 Inspection and replacement of the desiccant:

No.
Description
The desiccant is located in the compartment
opposite of the battery connectors. Remove
the old desiccant packs and inspect the color
indicator on the packs to determine if the
desiccant was consumed. Please estimate
and record how much the desiccant was
consumed.
Replace with new packs of the same type.

11.5 Inspection and Replacement of Batteries:

Battery removal is described as follows:
No.
Description
Note: Please review the safety section in this document before attempting to
replace batteries
If you have not already done so, please
disconnect the battery from the telemetry
board by separating the male and female
battery
separating the connectors.
connectors.
Use
Illustration
Illustration
caution
when
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

2atozbxrb

Table of Contents