Mounting Recomendations - Vega Absolute M-BUS-2 User Manual

M-BUS-2 / User Manual
LED SIGNAL
In case of connection attempt fail, the device will continue to accumulate
data and will attempt to connect to the network every 6 hours

MOUNTING RECOMENDATIONS

To provide the stable radio between the gateway and the device it is recommended
avoiding the device installation in the places which are barriers for the radio signal getting
through like a reinforced floors and walls, a basement, an underground facilities and wells, a
metal case etc.
The necessary stage for the network deploying including a big quantity of end devices is
a radio planning work with nature experiments.
Before starting mounting, make sure that the device has the latest
firmware version
For mounting you will need:
cross-shaped screwdriver
wire stripper;
laptop.
Step by step mounting be like:
1. Setting the devices and connecting them to the network are usually carried out in the
office (see Network Deployment Manual).
2. Determination of suitable places for mounting at the object with a network tester.
Revision 10 13.10.2021
-
Short flashlights
One long flashing
during 5 sec
Three flashing each by
1 sec
MEANING
Linking to the network in progress
The device has been successfully
connected to the network and is in
active mode
Linking to the network has been failed
or the device switched to the
«Storage» mode
11