Table of Contents
Advertisement
3. De-energizing the connected equipment, metering devices, etc.
4. Stripping wires in a bundle and connecting external equipment to them.
5. Connecting all necessary wires to the M-BUS-2 contacts.
6. M-BUS-2 converter uses an external antenna for operation. It must be connected to
the dedicated connector on the device board and lead out the wire through a special
groove in the case.
7. M-BUS-2 converter can be powered from built-in battery. For working with battery it
is necessary to connect it to battery connector on the board.
.
12
M-BUS-2 / User Manual
SMA connector for
an external
LoRaWAN antenna
connection
Power connectors
Revision 10 - 13.10.2021
Advertisement
Table of Contents
