Table of Contents
Advertisement
M-BUS-2 / User Manual
8. When the power is connected at the first time the device automatically switches to
the "Active" mode and starts registration in the network. But if the device with
connected battery or an external power has been switched to the "Storage" mode
(by pressing on the start button more than 5 sec) than you need to press the button
to start.
9. By the laptop make sure that the device successfully sends the data.
10. Assembling the device. It is necessary to make sure that the silicone gasket is installed
exactly in the groove of the case, the fasteners are tightened sufficiently tightly, the
case cover is tightly adjacent to the counterpart.
11. DIN-rail mounting or another available way to mount the device on the object.
Revision 10
13.10.2021
-
Press the start
button located on
the board
13
Advertisement
Table of Contents
