Accessing The Calibration Menu - AGFA Crystal-M Imager Reference Manual

Accessing the Calibration menu

1. Press the Key-operator key to enter the Key-operator mode.
2. On the Key-operator main menu, press the Down key five times followed
by the Confirm key to select 'Calibration'.
The 'Select calibration' menu is displayed:
3. Press the Escape key to return to the Key-operator main menu.
4. Press the Escape key to quit the Key-operator mode.
Crystal-M Imager | Advanced Operation (key-operator mode) | 63
Note: This menu is the starting point for calibrations.
3853B EN 20210520 0952