Dp-269/Le-200 Boards; Psw-61 Board - Sony MAV-70 Manual

2-5. Boards Replacement

2-5-3. DP-269/LE-200 Boards

1. Disconnect the power cords from the rear panel.
2. Remove the ornamental panel A. (Refer to Section 2-
2-1.)
3. Open the front panel A. (Refer to Section 2-4-2.)
4. Unstick the filter from the front panel A. (Refer to
Section 2-4-5.)
5. Remove the four screws (B 3x4) and the LCD case
lid.
6. Disconnect the two connectors (CN1, CN4) of the
harness connected to the DP-269 board.
7. Remove the six screws (B 3x4) and DP-269 board.
B 3x4
B 3x4
DP-269 board
8. Remove the two screws (B 2x8) and cable clamp.
9. Remove the two screws (B 3x6) and PSW-61 board
from the front panel A.
B 3x6

PSW-61 board

2-20 (E)
CN1
CN4
LCD case lid
B 3x4
Cable clamp
B 2x8
10. Remove the two screws (B 3x4) and disconnect the
connector (CN1) of the harness connected to the LE-
200 board.
11. Remove the LE-200 board.
LE-200 board
12. For installation, perform the removal procedures in
reverse order.
CN1
B 3x4
MAV-70