Upgrading The Rom On Board - Sony MAV-70 Manual

1-6. Upgrading the ROM on Board

1-6. Upgrading the ROM on Board
This section described how to update the ROM on the board using a macro function of Tera Term.
The ROM to be upgraded is as shown below.
CPU name Board
MAIN SY-253
DPC SY-253
FSE SY-253
CCM SY-253
DP DP-269
PU PU-102
ENDEC ENC-51 (BKMA-7010)
ENC ENC-47 (BKMA-7020)
DEC DEC-98 (BKMA-7030)
FC IF-677 (BKMA-7040)
n
When downloading DPC CPU (SY-253 board) of a loop-connected extension unit, open "Service:
Config" screen from the menu of the extension unit and set "Single".
After upgrading is completed, return the menu to the former setting.
Preparation (For except DP-269 board)
1. Remove ornamental panel A. (Refer to Section 2-2-1.)
2. Open "Service: Board Slot n" screen from the menu.
(For more details of the operation, refer to the Operation Manual.)
Exit Service : Board Slot 1 ENC
>Param
EXT232C -1- -2- -3- -4- -5- -6- -7- -8-
Rdy Rdy Rdy Rdy Rdy Rdy Rdy Rdy
3. Select "EXT232C" using the
using the and
n
For SY-253 board, press the [ENTER] button several times and select the CPU to be used.
Service : Board Slot 4 DEC
Exit
>Param
EXT232C -1- -2- -3- *4* -5- -6- -7- -8-
Rdy Rdy Rdy Rdy Rdy Rdy Rdy Rdy
4. Connect the MAV-70 to a personal computer and set the communication rate. (Refer to Section 1-2.)
5. Set the S3 switch on the front panel to INT.
Preparation (For DP-269 board)
1. Remove ornamental panel A. (Refer to Section 2-2-1.)
2. Connect the MAV-70 to a personal computer and set the communication rate. (Refer to Section 1-2.)
3. Set the S3 switch on the front panel to EXT.
1-12 (E)
Ref.
IC327, 340
IC107, 112
IC1306
IC1306
IC1107
IC104, 105
and buttons and then select the board to be treated (slot No.)
buttons. Press the [ENTER] button.
File name
SYM***.mot
SYD***.mot
SYF***.mot
SYC***.mot
DP***.mot
PU***.mot
ED***.mot
ENC***.mot
DEC***.mot
FC***.mot
MAV-70