Table of Contents
Advertisement
AU
Installation
Note: If the unit has not been
stored or moved in an upright
position, let it stand upright for
approximately 12 hours before
operation. If in doubt allow to
stand.
1. Remove the appliance from the packaging.
Make sure that all protective plastic film and
coatings are thoroughly removed from all
surfaces.
2. To optimize performance and longevity, ensure
a minimum clearance of 2.5cm is maintained
between the unit and walls and other objects,
with a minimum 5cm clearance on the top.
NEVER LOCATE NEXT TO A HEAT SOURCE.
Note: Before using the appliance
for the first time, clean the
interior with soapy water.
The appliance is supplied with
feet by default. However,
castors can be supplied as an
option. Castors can be ordered
using the code of AJ489.
3. Set the brakes on the castors to keep the
appliance in position.
Or,
Level the appliance by adjusting the screw
feet.
Fitting the Shelves (FA442-A/
FA443-A/GH333-A)
1. Place one set of shelf guides on either side of
the cabinet at the desired height.
2. Slide the shelf into place.
3. Slide the floor shelf in place.
4
FA440-A to FA443-A_GH332-A to GH333-A_A5_v2_20211229.indb 4
FA440-A to FA443-A_GH332-A to GH333-A_A5_v2_20211229.indb 4
Telephone Helpline: 1300225960
GN Pan Layout (for GH333-A only)
Note:
•
Use the spacer bars provided to fill any
gaps (they are not required to support
each GN pans).
•
Always close the lid when not in use.
•
The appliance is not intended for the
long term storage of food.
Operation
Storing Food
To get the best results from your POLAR appliance,
follow these instructions:
•
Only store foodstuffs in the appliance when it
has reached the correct operating temperature.
•
Do not place uncovered hot food or liquid
inside the appliance.
•
Wrap or cover food where possible.
•
Do not obstruct the fans inside the appliance.
•
Avoid opening the doors for prolonged periods
of time.
2021/12/29 11:26
2021/12/29 11:26
Advertisement
Table of Contents
