Toshiba RAV-GP561ATW-E Service Manual page 111

No. Part name
(9) Electronic 1. Detachment
expansion valve
coil
2. Attachment
<Handling precaution>
When handling the parts, do not pull the lead wires.
When removing the coil from the valve body, use your
hand to secure the body in order to prevent the pipe from
being bent out of shape.
(10) Fan guard 1. Detachment
Perform work on a corrugated cardboard, cloth, etc. to
prevent flaw to the product.
2. Attachment
Check that all the hooking claws are fixed to the
specified positions. (Push the fan guard in the direction
of outside toward center and check that the hooking
claws have fallen.)
Procedure
1) Following to work of Detachment of (2), (3) and (5).
2) Remove the coil by pulling it up from the electronic
control valve body.
1) When assembling the coil into the valve body,
ensure that the coil anti-turn lock is installed
properly in the pipe.
1) Following to work of Detachment of (2).
2) Remove the front cabinet, and put it down so that
fan guard side directs downward.
NOTE
3) Remove the hooking claws by pushing minus
screwdriver according to the arrow mark in the right
figure, and remove the fan guard.
1) Insert claws of the fan guard in the holes of the front
cabinet. Push the hooking claws (9 positions) by
hands and fix the claws.
NOTE
Correct Correct
Claw Claw Claw
Claw Claw Claw
Claw Claw Claw
Minus Minus Minus
screwdriver screwdriver screwdriver
111
Remarks
Incorrect Incorrect
Claw Claw Claw
Claw Claw Claw
Claw Claw Claw
Front cabinet Front cabinet Front cabinet
Claw Claw Claw