Toshiba RAV-GP561ATW-E Service Manual page 110

No. Part name
(7) Compressor 1) Following to work of Detachment of (1), (2), (3), (4)
2) Extract refrigerant gas.
3) Remove the partition plate.
4) Remove the sound insulation material.
5) Remove terminal cover of the compressor, and
Never reuse the compressor lead wires which you
disconnected. Use the new one. If you reuse it, it may
malfunction.
6) Remove pipe connected to the compressor with a
7) Remove the fixing screw of the bottom plate and
8) Remove the fixing screws of the bottom plate and
9) Pull upward the refrigeration cycle.
10) Remove NUT (3 pcs, H13 nuts) fixing the compres-
(8) Reactor 1) Following to work of Detachment of (2) and (3).
2) Remove screws fixing the reactors.
Procedure
and (5).
(4 pcs, M4 × 8 truss screws)
disconnect lead wire of the compressor from the
terminal.
NOTE
burner.
• Take care to keep the 4-way valve away from
naked flames. (Otherwise, it may malfunction.)
heat exchanger.
(1 pc, M4 × 8 truss screw)
valve fixing plate.
(2 pcs, M4 × 10 hexagon screws)
sor to the bottom plate.
(2 pcs, M4 × 8 truss screws)
Partition Partition Partition
plate plate plate
Compressor Compressor Compressor
110
Remarks
Valve Valve Valve
fixing fixing fixing
plate plate plate