Toshiba RAV-GP561ATW-E Service Manual page 109

No. Part name
(5) Side cabinet 1. Side cabinet (right)
2. Side cabinet (left)
Side cabinet Side cabinet Side cabinet
(right) (right) (right)
Hock Hock Hock
Detail A Detail A
Bottom Bottom Bottom
plate plate plate
(6) Fan motor 1) Following to work of Detachment of (2) and (3).
2) Remove the flange nut fixing the fan motor and the
3) Remove the propeller fan.
4) Disconnect the connector for fan motor from the
5) Remove the fixing screws (4 pcs, M4 × 8 truss
Procedure
1) Following to work of Detachment of (2) and (3).
2) Remove the fixing screws (3 pcs, M4 × 8 truss
screws) used for securing the side cabinet (right) to
the bottom plate and valve fixing plate.
1) Following to work of Detachment of (2).
2) Remove the fixing screw (1 pc, M4 × 10 hexagon
screw) used for securing the side cabinet to the
bottom plate.
3) Remove the fixing screws (2 pcs, M4 × 8 truss
screws) used for securing the side cabinet to the
heat exchanger.
Side cabinet Side cabinet Side cabinet
(right) (right) (right)
Hock Hock Hock
Bottom Bottom Bottom
plate plate plate
Detail B Detail B
propeller.
• Flange nut is loosened by turning clockwise.
(To tighten the flange nut, turn counterclockwise.)
inverter.
screws) holding by hands so that the fan motor does
not fall.
* Precautions when assembling the fan motor.
Tighten the flange nut using a tightening torque of
4.9 N•m.
Side cabinet Side cabinet Side cabinet
Hock Hock Hock (right) (right) (right)
Detail C Detail C
Bottom plate Bottom plate Bottom plate
109
Remarks
Side cabinet (right) Side cabinet (right) Side cabinet (right)
Valve fixing plate Valve fixing plate Valve fixing plate
A A
Bottom plate Bottom plate Bottom plate