Complete The First-Time Setup Worksheet - Polycom DMA 7000 Getting Started Manual

DMA Getting Started Guide

Complete the First-Time Setup Worksheet

System Configuration
Information
Node 1 system name
Node 1 IP address
Node 2 system name
Node 2 IP address
Virtual system name
Virtual IP address
System domain
Subnet mask
Default gateway
Primary DNS server
Secondary DNS server
Tertiary DNS server
2
Before you begin system setup, fill out the My System Values column of this
worksheet.
First-Time Setup Worksheet
My System Values Description
Local host name of the first (or only) Polycom
DMA system server. Must be a valid host
name: the letters a - z (case-insensitive), digits
0 - 9, and internal hyphens are allowed.
Static, physical IP address (dotted quad) for
the first (or only) Polycom DMA system server.
Local host name of the second Polycom DMA
system server. Not used for single-node
installation.
IP address for the second Polycom DMA
system server. Not used for single-node
installation.
Local host name of the virtual host. Required
even for single-node installation.
IP address of the virtual host. Required even
for single-node installation.
Fully qualified domain name for the system
(optional).
Network mask that defines the subnetwork of
the system.
IP address of the gateway server used to route
network traffic outside the subnet.
IP address of the primary Domain Name
System server (optional, but strongly
recommended; at least one DNS server is
required in order to import global groups from
an enterprise directory).
IP address of a second DNS server (optional).
IP address of a third DNS server (optional).
Polycom, Inc.