Keil Project - Wiznet W7100A Manual

4 KEIL Project

Projects that are supported by the W7100A / W7100 debugger are as below.
Keil uVision2 project

Keil uVision3 project

Only hex file (Restricted symbol function)

※ The W7100A / W7100 Debugger don't support the KEIL
can easily convert the
W7100 debugger.
※ Caution on W7100A / W7100A Lock function
The W7100A / W7100A has the memory lock function. If the lock was set, user cannot use
the W7100A / W7100 debugger because it cannot read anything from W7100A / W7100A
memory. So user should unlock to use the W7100A / W7100 debugger properly. It is easy to
unlock using the WizISP program. As shown in the figure 4.2, clear the check box and click the
"Lock" button. Whole memory will be erased after the unlocking so user should re-write the
firmware again.
Please refer to the Wiz ISP user manual for more detailed information about WizISP.
program and user manual are available on the WIZnet website.
© Copyright 2012 WIZnet Co., Inc. All rights reserved.
µ µ
Vision4 to Vision3 project as shown in the figure 4.1 to use the W7100A /
<Fig.4.1> Save Project to
µ
Vision4 or upper version project. But user
µ
Vision3 format
Ver. 1.1
WizISP
8