Wiznet W7100A Manual page 23

Table of Contents

Advertisement

: indicates the PC (Program Counter) in the source code
: means Breakpoint is set on this line
: the breakpoint can only be set on this shadowed line
Click the mouse right button in the Source window, user can see the Source window menu
as in the figure5.11.
Goto source line: Move the cursor to the set line
Set break: Set the breakpoint
Insert Variable window: Add the variable to the Search window
Run To Cursor Line: Run the C code to cursor line
Moreover, the Source window can assist some functions as below.
Can set the breakpoint by double clicking the C code.
Show the indicated variable value when the mouse pointer on the variable.
Assembly window
The assembly window shows the currently running assembly code. Also if the user clicks the C code at
the source window, it shows the related assembly codes. If the user opens only the HEX file without Keil
project files, only the assembly window will be shown without the source window.
In figure5.12,
: Indicates the PC's location of the instruction
: Indicates the break point
: Shows the assemble code with related C code
: Shows the break point
double click: Sets or unsets the break point
© Copyright 2012 WIZnet Co., Inc. All rights reserved.
[Fig.5.12] Assembly window
Ver. 1.1
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

W7100

Table of Contents