5 Debugger menu
5.1
Open project
The W7100A / W7100 debugger can debug the KEIL project or the hex file. To debug the
KEIL project or the hex file, run the W7100A / W7100 debugger and open the hex file.
Open Project.
The Open Project command is used to open a project.
Click the
icon of the toolbar. It can also be done by clicking Project Menu => Open or
pushing the short key Ctrl + O
The file open browser is opened as figure 5.2 'File open browser.'
© Copyright 2012 WIZnet Co., Inc. All rights reserved.
[Fig.5.3] Open project
Ver. 1.1
14