Power Bank Function; Battery Level Indication - Fenix LR50R Operating Instructions Manual

four indicators will be constant‐on after charging is complete.
3. Be sure to close the anti‐dust cover once charging is completed.
Power Bank Function
1. Switch off the light and plug the USB Type‐Csocket of the charging cable into the light, then
connect the another USB Type‐C socket of the charging cable to the digital device with an USB
Type‐C port.
2. Single click either of the switches to begin discharging, the indicators will recede from right to
left to display the status.
3. Be sure to close the anti‐dust cover once charging is completed.
Note:
1. Only Eco output level is available when charging and discharging.
2. The USB Type‐C port in the neck combines charging and discharging function.
3. The light and the included charging cable support PD3.0/PD2.0, QC3.0/QC2.0fast charging
protocols, the external adapter will be auto‐detected if it supports the mentioned fast‐charging
protocols, if it does then 4.0A charging current will be selected, or 2.5A charging current will be
selected.
4. Recharge a stored light every four months to maintain optimum performance of the battery.
Battery Level Indication
With the light switched off, single click either switch to check the battery status, whichwill last for
3 seconds.
Four blue lights on: 100% ‐ 80%
Three blue lights on:80% ‐ 60%
Two blue lights on:60% ‐ 40%
One blue light on: 40% ‐ 20%
One bluelight flashes: 20% ‐ 0
Note: This only works with the included Fenix ARB‐L52‐16000 battery pack.