Mode Switching; Output Selection; Lockout Function; Instant Turbo / Strobe / Sos - Fenix LR50R Operating Instructions Manual

The left switch is the auxiliary switch for on/off and output selection on functional mode.
On/off
Press and hold either of the switches for 0.5 seconds to turn on/off the light.
Mode switching
In general mode, single click the auxiliary (left) switch to enter turbo on functional mode.
In functional mode, single click the main (right) switch to enter the previously used output on
general mode,
Output Selection
In general mode, single click the main (right) switch to cycle through Eco→Low→Med→High I
→HighII→Turbo.
In functional mode, single click the auxiliary (left) switch to cycle through Turbo→Strobe→SOS.
Lockout Function
Lock: With the the light switched off and unlocked, simultaneously press the two switches for 3
seconds, the light will blink 2 times on Eco to indicate locked status.
Unlock: With the light locked, simultaneously press the two switches for 3 seconds, the light will
be activated on Eco.
* In locked status, clicking or pressing the switches will activate 2 one‐second blinks to indicate
locked status.
Instant Turbo / Strobe / SOS
With the light switched off, press and hold the auxiliary (left) switch for 0.5 seconds to enter instant
turbo, single click the auxiliary once again to enter strobe and then SOS.
Intelligent Memory Circuit
In general mode, the light memorizes the last selected output. When turned on again the