Table of Contents
Advertisement
Quick Links
Technical Parameters
ANSI/
PLATO FL1
Turbo
12000
lumens
Output
1hour
50
minute
Runtime
s*
950
meters
Distance
225750
candela
Intensity
Impact
Resistanc
e
Submersi
ble
Note: The above specifications are from the results produced by Fenix through its laboratory
testing using the Fenix ARB‐L52‐16000 rechargeable battery pack, under the temperature of
21±3°C and humidity of 50% ‐ 80%. The true performance of this product may vary according to
different working environments and the actual battery used.
*The Turbo, High II output are measured in total of runtime including output at reduced levels due
to temperature or protection mechanism in the design.
* The Turbo output will be 6000 lumens and the Strobe will be 3000 lumens when uses 21700
Fenix LR50R Flashlight
General Mode
High II
High I
Med
6000
3000
1000
lumen
lumen
lumen
s
s
s
2hour
2hour
7hour
s 20
s 40
s 40
minut
minut
minut
es *
es
es
690
480
280
meter
meter
meter
s
s
s
11840
58200
19800
0
candel
candel
candel
a
a
a
Functional Mode
Low
Eco
Turbo
350
50
12000
lumen
lumen
lumen
s
s
s
1hour
24hou
50
58hou
rs
rs
minut
es *
165
950
70
meter
meter
meter
s
s
s
22575
6850
1200
0
candel
candel
candel
a
a
a
1meter
IP68
Strob
SOS
e
6000
350
lume
lume
ns
ns
/
/
/
/
/
/
Advertisement
Table of Contents
Related Manuals for Fenix LR50R
Summary of Contents for Fenix LR50R
- Page 1 1meter Impact Resistanc e IP68 Submersi ble Note: The above specifications are from the results produced by Fenix through its laboratory testing using the Fenix ARB‐L52‐16000 rechargeable battery pack, under the temperature of 21±3°C and humidity of 50% ‐ 80%. The true performance of this product may vary according to different working environments and the actual battery used. *The Turbo, High II output are measured in total of runtime including output at reduced levels due to temperature or protection mechanism in the design. * The Turbo output will be 6000 lumens and the Strobe will be 3000 lumens when uses 21700 ...
- Page 2 battery due to the limited battery power. Runtime Graphics Product Features 12000 lumens maximum output; 950 lumens maximum beam distance. 4 Luminus SST70 LED's with a lifespan of 50,000 hours. Included a 3.6V/16000 mAh rechargeable LI‐ion battery pack; compatible with 1‐4 21700 Li‐ ion battery. Intelligent brightness downshifting sensor to avoid high temperature at close‐range lighting. Instant Turbo activation rapidly responds to emergency situations. USB Type‐C charging and discharging interface, supports PD3.0/PD2.0, QC3.0/QC2.0 fast‐ charging protocols. Battery level indication for instant checking of remaining battery level. Made of durable A6061‐T6 aluminum. Premium type HAIII hard‐anodized anti‐abrasive finish. Size: 6.42'' x 3.46'' x 2.36'' / 163 x 88 x 60 mm. Weight: 34.8 oz / 986 g (including battery) ...
- Page 3 The left switch is the auxiliary switch for on/off and output selection on functional mode. On/off Press and hold either of the switches for 0.5 seconds to turn on/off the light. Mode switching In general mode, single click the auxiliary (left) switch to enter turbo on functional mode. In functional mode, single click the main (right) switch to enter the previously used output on general mode, Output Selection In general mode, single click the main (right) switch to cycle through Eco→Low→Med→High I →HighII→Turbo. ...
- Page 4 In functional mode, the light will be activated on Turbo each time it is turned on, for emergency situations. * The light does not have memory function if 21700 battery is used. Battery Specifications Nominal Type Dimension Usability Voltage Li‐ion battery pack Fenix ARB‐L52‐16000 3.6V Recommended √√ Rechargeable battery (Li‐ 21700 * 3.6V Usable √ ion) Rechargeable battery (Li‐ 18650 3.6V Banned × ion) Non‐rechargeable battery CR123A 3.0V Banned × (Li‐ion) * Warning: 21700 Li‐ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Only use quality batteries with circuit protection will reduce the potential for combustion or explosion; but cell damage or short circuiting are ...
- Page 5 Type‐C port. 2. Single click either of the switches to begin discharging, the indicators will recede from right to left to display the status. 3. Be sure to close the anti‐dust cover once charging is completed. Note: 1. Only Eco output level is available when charging and discharging. 2. The USB Type‐C port in the neck combines charging and discharging function. 3. The light and the included charging cable support PD3.0/PD2.0, QC3.0/QC2.0fast charging protocols, the external adapter will be auto‐detected if it supports the mentioned fast‐charging protocols, if it does then 4.0A charging current will be selected, or 2.5A charging current will be selected. 4. Recharge a stored light every four months to maintain optimum performance of the battery. Battery Level Indication With the light switched off, single click either switch to check the battery status, whichwill last for 3 seconds. Four blue lights on: 100% ‐ 80% Three blue lights on:80% ‐ 60% Two blue lights on:60% ‐ 40% One blue light on: 40% ‐ 20% One bluelight flashes: 20% ‐ 0 Note: This only works with the included Fenix ARB‐L52‐16000 battery pack. ...
- Page 6 Intelligent Brightness Downshifting Sensor The flashlight has a built‐in intelligent sensing circuit. When the light surface is close to the lighting object (about 60mm) for more than 1.5 seconds, the flashlight will automatically downshift the output level to Eco to avoid danger caused by high temperature. When the light surface is more than 0.8 seconds away from the lighting object, the flashlight automatically recalls the previouslyused output level. *As objects of different materials and colors reflect differently to light, there will be slight deviations in the sensing distance. Intelligent Protection Time‐limited downshift With the light switched on, if Turbo is being selected for over 20 seconds, the light will downshift ...
- Page 7 Solution: Replace battery (Ensure batteryis inserted according to the manufacturer’s specifications). B: The threads, PCB board contact or other contacts are dirty. Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol. If the above methods don't work, please contact your authorized distributor. Included Fenix LR50R flashlight, ARB‐L52‐16000 Li‐ion battery pack, USB Type‐C charging cable, Lanyard, Holster, Shoulder strap, Spare O‐ring, User manual, Warranty card Warning This flashlight is a high‐intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone's eyes. ...
- Page 8 All information provided in this manual is subject to change without prior notice. ...
Need help?
Do you have a question about the LR50R and is the answer not in the manual?
Questions and answers