Ceiling radiation damper for bathfan simple & bathfan select fit (3 pages)
Summary of Contents for SystemAir SAVE Light
Page 1
Residential Ventilation Systems SAVE Light User Manual systemair...
Page 2
2.2.1 Confirm filter change ......................5 2.3 Alarm display ..........................5 2.4 Standby mode ..........................5 3. Connection ............................6 3.1 Changing the Address (if more than one SAVE LIGHT control panel is used) ....6 4. Dimensions ............................7 5. Accessories ............................7 systemair...
Page 3
1. SAVE LIGHT control panel SAVE LIGHT is an easy to use Control panel for residential air handling units from the SAVE series. It allows to change between the 4 pre configurated air flow levels. It also indicates if an alarm is present or if the Filters have to be changed.
Page 4
The extra stages minimum and maximum can only be activated by a signal from an external source (e.g. via a digital input). The "AUTO" mode can be configured using the SAVE TOUCH control panel. It is not recommended to set fan to Off in standard households. systemair...
Page 5
Information about the alarm can be called up via the SAVE TOUCH control unit or via the SAVE Connect module. It is not possible to acknowledge alarms via the SAVE LIGHT control unit. 2.4 Standby mode The sleep mode of the control panel is active between 21:00pm and 07:00am. In this state, all lights on the control unit are switched off.
Page 6
The maximum cable length should not go above 50 meters or it will not work. Up to five SAVE LIGHT control panels can be connected to one air handling unit. When con- necting multiple control panels, the HMI Address has to be adjusted. The addresses HMI6 to HMI10 are intended for SAVE LIGHT;...
Page 7
For a simple control panel wall installa- tion 24782 CEC Cable w/plug 12m For the extension of up to 12m 37367 CE/CD-diverting plug 4pin Twin plugs for installation of several control panels typ CD or CE for one unit. systemair...
Need help?
Do you have a question about the SAVE Light and is the answer not in the manual?
Questions and answers