9 - Cleaning 10 - Control with an External Device 10 - Control with an External Device 11 - Control with the Lode Ergometry Manager (LEM) 11 - Control with the Lode Ergometry Manager (LEM) 12 - List of symbols used...
Care should be taken in mounting or dismounting the ergometer. Be aware of feet when replacing the ergometer. The operator should not touch accessible parts and the patient simultaneously. M938901/938903_MANUAL VALIANT 2 REHAB (XL) / VERSION: V1.1 - 2016-08-25 3/22...
Page 4
The test subject shall wear clothes when using the harness or the lanyard belt to prevent skin irritation. Replacement of parts can only be done by the manufacturer or designated service personnel. M938901/938903_MANUAL VALIANT 2 REHAB (XL) / VERSION: V1.1 - 2016-08-25 4/22...
Page 5
If this equipment is modified, appropriate inspection and testing must be conducted to ensure continued safe use of the equipment. Cleaning and user maintenance shall not be made by children without supervision. M938901/938903_MANUAL VALIANT 2 REHAB (XL) / VERSION: V1.1 - 2016-08-25 5/22...
Page 6
The test subject should wear proper sports clothing. The operator should check possible entrapment of clothing, fingers or feet, before the start of an exercise test. M938901/938903_MANUAL VALIANT 2 REHAB (XL) / VERSION: V1.1 - 2016-08-25 6/22...
This manual covers all VaIiant 2 rehab versions starting with the following serial number: 938901 Valiant Rehab: S/N 20140001 938903 Valiant Rehab XL: S/N 20140001 Date of issue: September 2018 M938901/938903_MANUAL VALIANT 2 REHAB (XL) / VERSION: V1.1 - 2016-08-25 7/22...
11. Magnetic contact for safety belt 6 - Install your treadmill 1. While unpacking the Lode treadmill ergometer, leave the transport straps on both ends in place. 2. Place the treadmill in the location where it will be used. 3. Remove Both transport straps and remaining packaging materials.
Opening of the equipment by unauthorized agencies is not allowed and will terminate any claim to warranty. Lode will make available on request circuit diagrams, component part lists, descriptions, calibration instructions, or other information that will assist authorized service personnel to repair those parts of the ergometer that are designated by Lode as repairable by authorized service personnel.
The red marked area shows where you can check the belt alignment. The goal is to align the belt edge exactly in the center of the hole. M938901/938903_MANUAL VALIANT 2 REHAB (XL) / VERSION: V1.1 - 2016-08-25 10/22...
9 - Cleaning The belt can be cleaned with a sponge, with little lukewarm water. Allow the belt to dry thoroughly after cleaning before re-using the treadmill. M938901/938903_MANUAL VALIANT 2 REHAB (XL) / VERSION: V1.1 - 2016-08-25 11/22...
1. Connect the device with the supplied cable to the external device. You can control the device with e.g. an exercise ECG device or Metabolic Card. 2. Download the interfacing instructions from the internet at www.lode.nl after you have registered your device.
The equipment has a safety earth (ground) connection and must be connected to an earthed (grounded) wall socket. Tested and certified to U.S. and Canadian National Standards by a NRTL, viz TÜV Rheinland. Compliance for U.S. and Canadian markets. M938901/938903_MANUAL VALIANT 2 REHAB (XL) / VERSION: V1.1 - 2016-08-25 13/22...
The specification in this manual is of the basic version of the product at the time of the publication of this manual. The specification of all actual versions can be found on the Lode website. www.lode.nl Changes to specifications can be made without prior notice.
Page 19
Connect to ECG and spirometers Speed 0.5 – 20 km/h for Speed 1 – 25 km/h for Valiant Network module connection Pediatric handrail extension Extend connectivity Valiant 2 cable M938901/938903_MANUAL VALIANT 2 REHAB (XL) / VERSION: V1.1 - 2016-08-25 19/22...
Page 20
Handrails, Side - Adjustable for Valiant 2 with support Partnumber: 938841 Partnumber: 938841 Safe and flexible handrails with support Handrails, Adjustable for Valiant 2 with support M938901/938903_MANUAL VALIANT 2 REHAB (XL) / VERSION: V1.1 - 2016-08-25 20/22...
CE class of product with optional BPM Russian user interface CB according to IECEE CB Spanish user interface Turkish user interface Ukrainian user interface Connectivity Optional USB connector Optional RS232 connector M938901/938903_MANUAL VALIANT 2 REHAB (XL) / VERSION: V1.1 - 2016-08-25 21/22...
Page 22
Maximum storage & transport air pressure 106 kPa Minimum air pressure storage & transport 50 kPa Max. humidity storage & transport 95 % Min. humidity storage & transport 10 % Order info Partnumber 938901 M938901/938903_MANUAL VALIANT 2 REHAB (XL) / VERSION: V1.1 - 2016-08-25 22/22...
Need help?
Do you have a question about the Valiant 2 Rehab and is the answer not in the manual?
Questions and answers