Panasonic PAN9028 Integration Manual page 28


PAN9028 Bluetooth/Wi-Fi Module
8.1.5 Approved Antenna List
Item Part Number
1 ANT162442DT-
2001A2
2 X9001091-
W3DRMW
2016693-x
3 X9001091-
W3DRMB
2016693-x
8.1.6 RF Exposure
To comply with FCC RF Exposure requirements, the OEM must ensure that
only antennas are installed which are listed in
The preceding statement must be included as a "CAUTION" statement in
manuals for products operating with the approved antennas to alert users on
FCC RF Exposure compliance.
Any notification to the end user of installation or removal instructions about the
integrated radio module is not allowed.
The radiated output power of the PAN9028 with a mounted ceramic antenna
(FCC ID: T7V9028 for model ENWF9408A1EF and model ENWF9408A2EF)
are fulfilled for mobile configuration. The installation of the module is restricted
to mobile host devices. The PAN9028 shall be used in such a manner that the
potential for human contact during normal operation is minimized.
End users may not be provided with the module installation instructions.
OEM integrators and end users must be provided with transmitter operating
conditions for satisfying RF exposure compliance.
Module Integration Guide Rev. 1.0
Manufacturer Type
TDK Chip
antenna
Kyocera AVX Dipole
antenna
assembly
TE
Connectivity
Kyocera AVX Dipole
antenna
assembly
TE
Connectivity
8 Regulatory and Certification Information
Polarization Frequency Band Gain (dBi)
2.400 GHz to
Linear
2.484 GHz
5.150 GHz to
5.850 GHz
2.400 GHz to
Linear
2.485 GHz
5.150 GHz to
5.850 GHz
2.400 GHz to
Linear
2.485 GHz
5.150 GHz to
5.850 GHz
 8.1.5 Approved Antenna
2.1
1.5
1.8
2.9
1.8
2.9
List.
Page 28 of 34