European Conformity According To Red (2014/53/Eu) - Panasonic PAN9028 Integration Manual


PAN9028 Bluetooth/Wi-Fi Module

8.3 European Conformity According to RED (2014/53/EU)

The PAN9028 modules with model number ENWF9408A1EF and
ENWF9408A2EF comply with the standards according to the following LVD
(2014/35/EU), EMC-D (2014/30/EU) together with RED (2014/53/EU) articles.
Standards
•
Due to the model size, the CE marking is displayed in the installation instruction and on
the package label only. It cannot be displayed according to regulation (EU) No. 765/2008
in 5 mm height on the module's label due to the limited space.
•
The RED EU Type Examination Certificate No. G0M-2010-9377-V01 issued by the
Notified Body 0682, can be used for the OEM end product conformance assessment. If a
Notified Body has been contracted for the end product conformity assessment, it should
be noted that this EU Type Examination Certificate should be used for conformance
assessment.
As a result of the OEM end product conformity assessment procedure described in 2014/53/EU
Directive and other applicable EU directives, the end customer equipment should be labelled as
follows:
The requirements for CE marking are described in regulation (EU) No 765/2008 Annex II.
The end customer has to assure that the device has a distance of more than
20 cm from the human body under all circumstances.
The end customer equipment must meet the actual Safety/Health requirements
according to RED.
PAN9028 and its model versions in the specified reference design can be used in all countries
of the European Economic Area (Member States of the EU, European Free Trade Association
States [Iceland, Liechtenstein, Norway]), Monaco, San Marino, Andorra, and Turkey.
Module Integration Guide Rev. 1.0
8 Regulatory and Certification Information
Page 33 of 34