Table of Contents
Advertisement
Installation (continued)
Installing the bracket to the projector
Attach the projector mount bracket to the projector (sold separately).
*PT-RZ470 is used as an example in the illustrations throughout this manual.
Projector mount bracket
Arrow
Suspending the projector
Angle adjusting bracket
14 - ENGLISH
1) Place the projector upside-down onto a piece of
soft material.
Secure in four places
2) Secure the projector mount bracket to the bottom
of the projector using the four supplied captive
washer screws (M4 × 10) as illustrated on the left.
1) Screw the supplied two captive washer hex head
bolts (M6 × 16) half way into the screw holes at the
top of the angle adjusting bracket.
Attention
z Check that the thread ridges of the temporarily
fastened captive washer hex head bolts are
correctly and firmly affixed to the thread of the
angle adjusting bracket.
Thread
Advertisement
Table of Contents
