Table of Contents
Advertisement
Installation (continued)
Secure with the supplied captive washer hex head bolts
2) Insert the temporarily fastened captive washer hex
Hook
3) As illustrated on the left, use two supplied hex
head bolts on either side into the hook section of
the projector mount bracket.
Attention
z Hold the projector firmly until the captive washer
hex head bolts are securely in place in the hook
part of the projector mount bracket.
WARNING:
Mounting and installation must be carried out
by two or more persons.
head bolts (M6 x 16) to secure the projector mount
bracket to the angle adjusting bracket.
Attention
z After adjusting the installation angle on pages 18
to 19, securely tighten the captive washer hex
head bolt of the angle adjusting bracket in four
places at the front and rear.
ENGLISH - 15
Advertisement
Table of Contents
