Product Description - Panasonic ET-PKR100P Installation Instructions Manual

Product description

This is a ceiling mount bracket for installing projectors.
■ Structural components
Parts name
Attachment plate
Projector mount
bracket
Adjustment pole
Angle adjusting
bracket
Pole brace
Pole base
Screws and bolts
Ceiling mount
bracket drop
prevention kit
4 - ENGLISH
Form (number of parts)
Adjustment pole 1
× 1
Hex head bolt, captive washer (M6×80)
Screw, captive Hex head bolt,
washer (M4×10) × 4 captive washer
Wire rope for ceiling
Flat washer (M8) × 1 (2.0 mm (3/32") wire
The attachment plate is attached
to the ceiling via four ceiling
mount bolts.
Installation methods are different
for concrete and wooden ceilings.
It also allows horizontal swing
× 1 adjustment.
This is used to install the projector
itself.
It also includes a function for
adjusting the left/right tilt.
× 1
This is the adjustment pole
which is installed in between the
Adjustment pole 2
attachment plate and the projector
mount bracket.
It also includes a function for
adjusting the distance between
× 1 the ceiling and the projector itself.
This is attached to the projector
mount bracket.
It also allows vertical swing
adjustment.
× 1
This is attached to the attachment
plate to secure adjustment pole 1.
× 1
This is attached to the adjustment
pole 2.
× 1
Flat washer (M6) × 4
Hex nut (M6) × 4
× 4
These are used to assemble the
bracket and mount it onto the
projector.
(M6×16) × 24
Prevents the the ceiling mount
mount bracket
bracket from falling.
diameter, 800 mm
(31-1/2") length) × 1
Applications