Table of Contents
Advertisement
Product description (continued)
Parts name
Wire rope for the
Projector drop
projector
prevention kit
(2.0 mm (3/32")
wire diameter,
600 mm (23-5/8")
length)
■ The user must also obtain the following parts. (commercially-available)
Installation work
Installing to a
Installing the
wooden structure
attachment plate to
the ceiling
Installing to a
(Bolt size: M10)
concrete structure
Installing to a
Installing the ceiling
wooden structure
mount bracket drop
prevention kit
Installing to a
(Bolt size: M8)
concrete structure
z Store small parts in an appropriate manner, and keep them away from small children.
z Tightening torque for the screws are, M4: 1.25±0.2 N•m, M6: 4±0.5 N•m, M8: 10±1 N•m, and M10: 20±1 N•m.
z When tightening up the screws, use a tool such as a torque screwdriver or torque wrench. Do not use electric
screwdrivers or impact screwdrivers.
Attention
z Dispose of the packaging materials properly after taking the product out of it.
Form (number of parts)
Screw, captive
washer (M4×10)
× 1
Ceiling mount bolt (× 4), Hex nut (× 16), Flat washer (× 16),
Spring washer (× 8)
Ceiling mount bolt (× 4), Hex nut (× 12), Flat washer (× 12),
Spring washer (× 8), Anchoring nut or curled plug (× 4)
Ceiling mount bolt (× 1), Hex nut (× 2), Flat washer (× 1),
Spring washer (× 1)
Anchoring nut or curled plug (× 1), Hex head bolt (× 1),
Spring washer (× 1)
Applications
Prevents the projector from
× 1
falling.
Required parts
Page
12
13
17
17
ENGLISH - 5
Advertisement
Table of Contents
