Standard installation dimensions
The dimensional relationship between the screen and the projector is shown below.
Establish the dimensions after assessing the area possible for installation.
If your projector has a zoom lens, you can use it to adjust the projected image size and the projection distance.
Check the projected image while making fine adjustments.
Projected image
SW
(Note) This drawing is not in exact scale.
Attention
z Install the projector with at least 500 mm (19-11/16") gap from the surrounding walls or objects in order to
ensure that the air intake/exhaust ports of the projector will not be blocked.
z Avoid setting up in places which are subject to sudden temperature changes, such as near an air conditioner or
lighting equipment.
Note
z Depending on the product, the appearance may differ from the illustrations in these installation instructions.
6 - ENGLISH
L (LW/LT)
Screen
Ceiling
211
(8-5/16")
100 (3-15/16")
200
(7-7/8")
<Units: mm (")>