Ethernet Interface; Can Port - ZLG CANSwitch-AN2S2 User Manual

CANSwitch-AN2S2
High-Performance Dual-CAN to Ethernet Switch User Manual
Tip: After default settings are restored, all current configurations will be lost. Operate
with caution.

2.5 Ethernet Interface

Figure 2.7 shows the appearance of the Ethernet (RJ45) interface of
CANSwitch-AN2S2, with four indicators. The Link indicator is green, indicating whether
the Ethernet is physically connected. If it is connected to the Ethernet, the Link indicator is
always on; the Active indicator is yellow, indicating whether there is data transmission. If
the Ethernet has data transmission, the Active indicator flashes.
Figure 2.7 shows the pin order of the Ethernet interface. Table 2.1 shows the pin
definitions.

2.6 CAN Port

The CANSwitch-AN2S2 device has two CAN ports. Figure 2.8 shows its appearance.
It has two indicators: CAN0 and CAN1. When a device is connected, when there is data
communication; Table 2.2 describes the pin definition.
Table 2.2 Definition of CANSwitch-AN2S2 CAN port pins
Signal
Figure 2.7 Ethernet interface and indicators
Table 2.1 RJ45 pin definition
Pin
1
2
3
4
5
6
7
8
Figure 2.8 CAN interface and indicators
Introduction
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
8
Signal
Tx+
Tx-
Rx+
Bi+
Bi-
Rx-
Bi+
Bi-
User Manual