Table of Contents
Advertisement
CANSwitch-AN2S2
High-Performance Dual-CAN to Ethernet Switch User Manual
5.4 Configuring Parameters
5.4.1 Configuration in Hub Mode (Hub Mode)
Table 5.1 describes the default settings in the CANSwitch-AN2S2 device hub mode.
Table 5.1 Description of "Property column" items in hub mode
Category
Name
Device model
Device firmware
version
Basic
information
Equipment name
Current password
Whether to
change the
password
Password
operation
New password
Confirm the new
password
Device No.
Network
information
Number of
networking
devices
Default
This item cannot be changed.
CANSwitch-AN2S2
It is related to the
Display the latest firmware version
device delivery time.
number of the device.
The value can be changed and contains
a maximum of 15 characters, consisting
of a to z, A to Z, 0 to 9. Modifying this
CANSwitch-AN2S2
value is very useful for users to identify
multiple CANSwitch-AN2S2 devices on
the same network.
Before changing other items, you must
enter
"88888"
password contains a maximum of 10
characters, including a to z, A to Z, 0 to
9.
You can set "New Password" and
No
"Confirm Password" only if you select
"Yes".
If "Whether to change the password" is
"No", the password cannot be changed.
Used to enter a new password. The
None
password contains a maximum of 10
characters. For the character range,
see the description in the "Current
Password" column.
If "Whether to change the password" is
"No", the password cannot be changed.
None
Used to confirm the new password. It
must be the same as "New Password".
The range is 1-32. In the cascade, it is
used to select the position of the device
in the cascade and associate it with the
1
CAN
example, device 2 in device 2CAN0
refers to the device number filled here.
The range is 2-32. It is used to select
2
how many devices are required to be
cascaded.
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
61
User Manual
Description
the
correct
password.
forwarding
configuration.
The
For
Advertisement
Table of Contents
