Table of Contents
Advertisement
CANSwitch-AN2S2
High-Performance Dual-CAN to Ethernet Switch User Manual
Category
Upper limit of
the extended
CAN0
configuration
Lower limit of
the extended
Device 1CAN1
Device 2CAN0
CAN0
Device 2CAN1
forwarding
configuration
3-32CAN0
3-32CAN1
Except for the working port, destination port and destination IP address, the default
parameter values of
same as that of each parameter of CAN0.
5.4.2 Configuration in Converter Mode (Converter Mode)
Table 5.2 describes the device configuration in converter mode.
Table 5.2 Description of "Properties column" items in Converter mode
Category
Name
Device model
Device
firmware
version
Basic
informati
on
Equipment
name
Current
password
Passwor
d
operation
Whether to
change the
password
Continued
Name
Default
1FFFFFFF
（HEX）
frame
00（HEX）
frame
Deselected
Deselected
Deselected
Device
Deselected
Device
Deselected
CAN1 are exactly the same; the meaning of each parameter is the
Default
CANSwitch-AN2S2
It is related to the
device delivery time.
CANSwitch-AN2S2
"88888"
No
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
63
Description
After CAN_AF is enabled, the upper
and lower limit values of the received
extended frame ID set by the user
together determine the range of the
extended frame ID to be received.
If it is selected, the data of CAN0 port
will be forwarded to the corresponding
CAN bus. It is deselected by default. A
maximum of 63 CAN buses can be
forwarded.
Description
This item cannot be changed.
Display the latest firmware version number of
the device.
The value can be changed and contains a
maximum of 15 characters, consisting of a to z,
A to Z, 0 to 9. Modifying this value is very
useful
for
users
to
CANSwitch-AN2S2 devices on the same
network.
Before changing other items, you must enter
the correct password. The password contains a
maximum of 10 characters, including a to z, A
to Z, 0 to 9.
You can set "New Password" and "Confirm
Password" only if you select "Yes".
User Manual
identify
multiple
Advertisement
Table of Contents
