Features - Radicom Research RB8762CMF Series Designer's Manual

Features

 Support the Bluetooth 5.0 core specification
 Frequency Range 2.402 – 2.480 GHz
 Integrate MCU to execute Bluetooth protocol stack
 Ultra low power consumption with intelligent PMU
 Support BT5.0 MESH
 Supports Master and Slave modes
 Support fully multiple Low Energy states
 Support LE L2CAP Connection Oriented Channel Support
 Support LE low duty directed advertising
 Support LE data length extension feature
 Integrated Bluetooth low energy stack including ATT, GATT, SMP, L2CAP, GAP
 Generic Applications for GAP Central, Peripheral, Observer and Broadcaster Roles
 Support OTA (Over-the-Air) programming
 Firmware upgradeable through serial port
 Support internal 32KHz OSC or external 32KHz clock input for low power mode
 Low power 3.3V operation
 TX Power: 4.0 dBm Max ~ RX Sensitivity: -97dBm Min
 Range: Up to 20 meters (line of sight)
 15 GPIOs, 3 configurable LED pins
 Hardware Keyscan and Quad-decoder
 Embedded 4MB flash
 Embedded IR transceiver
 Embedded 8-CH 12-bit ADC
 Embedded G-sensor
 Support AES128/192/256 encrypt/decrypt engine
 Serial Interface ( SPI / I
2 C / PWM)
 Support 3wire/2wire SPI
 Wake-up interrupt
 Watch Dog Timer
 Small sizes:RB8762CMF ~ 23.5x13.1 mm
RB8762CMF-D ~ 90x20 mm
 On-board microprocessor, RAM and ROM
 On-board antenna or on-board U.FL connector for external antenna
 0°C to +70°C temperature operating
RB8762CMF Designer's Guide (RRD2Z50-20180802001-A07-C3) 5