Table of Contents
Advertisement
RB8762CMF EVK and BLE Functionality
Radicom provides RB8762CMFEVK (development kits) as a quick platform for testing and
evaluating the RB8762CMF and RB8762CMF-HM Bluetooth modules. The kit includes two
RB8762CMF modules mounted on the RB8762CMF-HM DIP Module. Each RB8762CMF-HM is
installed into a RB8762CMF-MB evaluation board. One of the RB8762CMF-HM is configured to
operate in BLE Data Protocol Master Mode. The other RB8762CMF-HM is configured to operate in
BLE Data Protocol Slave mode. The RB8762CMF-MB boards have an RS232 Serial Port connector
and USB interface that allows the user to immediately connect to any standard serial port to evaluate
the Bluetooth modules.
The RB8762CMF modules are defaulted to use the BLE Data Protocol. For BLE Data Protocol
operation, you need one Radicom Master and one Radicom Slave module. The Slave Model
RB8762CMF-S advertises or broadcasts the Bluetooth signal. The Master Model RB8762CMF-M
will scan for Bluetooth signals and then request a Bluetooth connection. The RB8762CMF-S Slave
can then accept the connection for BLE Data transfers. The RB8762CMF-S Slave can also operate
with remote devices that also support the BLE Data Protocol.
RB8762CMF Designer's Guide (RRD2Z50-20180802001-A07-C3)
4
Advertisement
Table of Contents
