This chapter will show you how to use OTA to upgrade firmware.
Step 1. Plug in USB cable to power on RB8762CMF-MB.
Step 2. Follow
page14
Step 3. Issue "at+role2<CR><LF>" to enter OTA mode(as below)
Step 4. Install OTA APP (OTA.apk) in your Android smart phone.
Step 5. Upload the latest firmware file into your smart phone.
Step 6. Launch OTA APP and search for "Radicom_OTA" device. Then click the device to enter next
step.
RB8762CMF Designer's Guide (RRD2Z50-20180802001-A07-C3)
OTA Upgrade Firmware
to setup RB8762CMF-MB with Docklight
20