Layout Design Suggestions - Radicom Research RB8762CMF Series Designer's Manual

General Layout Rules:
All Printed Circuit Boards must comply with UL94 V0 standard for flammability. Always use RoHS
compliant Parts and materials.
Suggestions for Layout:
Step 1. Do not place Power circuit, X'tal, Inductor, etc. near RF area.
Step 2. The bigger Antenna clearance area, the better. The Antenna itself needs to stay away from
any circuit or component at least 3mm. Antenna clearance area means Top and Bottom both
required to be cleared.
Step 3. Do not use metal materials on design where near Antenna area. For example, battery snaps,
USB connector, iron case, etc.
These guidelines are for design reference; real performance still depends on actual design.
RB8762CMF Designer's Guide (RRD2Z50-20180802001-A07-C3)

Layout Design Suggestions

12