Table of Contents
Advertisement
FCC & IC Label and Model Identification
Pending
The RB8762CMF module family is FCC Part 15 and IC (Industry Canada) certified. The
RB8762CMF is also CE marked. The modules are labeled with the RB8762CMF module
model number and FCC Part 15 ID, IC registration number and CE mark. The label can be
found on top of the metal shielding on the RB8762CMF Module.
Note: Models RB8762CMF-HM will have an additional Product ID label containing the HM
model number.
Important Regulatory Compliance and User Information
The final product with the modules installed needs to be tested for FCC Part 15, IC (Industry
Canada) CE, EMI/RFI compliance. Radicom certification documentation will help
streamline the final product approval process. Contact Radicom for more information. To
maintain compliance in the finished product, carefully follow guidelines in this section. This
device is intended only for OEM integrators under the following condition:
The transmitter module may not be co-located with any other transmitter or antenna. As long
as this condition is met, further transmitter testing will not be required. However, the OEM
integrator is still responsible for testing their end product for any additional compliance
requirements required with the module installed (for example, digital device emissions, PC
peripheral requirements, etc).
IMPORTANT NOTE: In the event that this condition cannot be met then the FCC
authorization is no longer considered valid and the FCC ID cannot be used on the final
product. In these circumstances, the OEM integrator will be responsible for re-evaluating the
end product (including the transmitter) and obtaining a separate FCC authorization.
RB8762CMF Designer's Guide (RRD2Z50-20180802001-A07-C3)
25
Advertisement
Table of Contents
