Graco Contractor King 279005 Instructions Manual page 19

Add Lubrication
Methods for adding lubrication are described below.
Lubricate Air Valve
Perform these steps annually, or more often depending
on your duty cycle, air pressure, and air quality. Use a
high quality lithium-based grease.
• Remove and disassemble the air valve
(see Remove Pump, page 23).
• Grease all visible moving parts, especially detent
and valve pistons.
Add Accessory Air Lubricator for Motor Lubrication
• To add a lubricator with kit 19D955.
• Add oil to line for whole motor lubrication.
Disconnect air line close to the motor and add 1-2
cc of SW30 oil.
NOTE: Adding oil to the air motor will result in some oil
being present in the exhaust air.
3A9121A
Maintenance
19