Garmin Virb Action Cameras; Connecting A Virb 360 Action Camera; Connecting A Virb Action Camera; Controlling The Virb Action Camera With The Chartplotter - Garmin Volvo Penta Glass Cockpit B7 Owner's Manual

Garmin VIRB Action Cameras
®
Do not view video or photos while operating the vessel.
Failure to pay attention to the conditions on the water can
result in vessel damage, personal injury, or death.
Most VIRB action cameras connect to the chartplotter
from the camera menu (Connecting a VIRB Action
Camera, page 72).
The VIRB 360 camera connects using WPS
a VIRB 360 Action Camera, page
In this manual, the term "VIRB action camera" refers to all
models, except in the instructions on how to connect. In
that case, as listed above, the term "VIRB 360 camera"
refers to only the 360 model.

Connecting a VIRB 360 Action Camera

You can connect a VIRB 360 action camera to the
chartplotter using WPS. If you are connecting a VIRB
camera, connect through the camera settings
a VIRB Action Camera, page
1 Set up the chartplotter's Wi‑Fi network
‑ Fi Wireless Network, page
Wi
2 Bring the camera near the chartplotter.
3 On the VIRB 360 camera main menu, select Wireless
> Wi-Fi.
4 If necessary, select the Wi-Fi toggle switch to enable
the Wi‑Fi technology.
5 Press to select WPS, and press OK.
6 On the chartplotter, select A/V, Gauges, Controls >
VIRB® > .
The camera searches for the Wi‑Fi network and
connects.
You can control the camera using the chartplotter.

Connecting a VIRB Action Camera

You connect a VIRB action camera to the chartplotter
using the camera settings. If you are connecting a VIRB
360 camera, connect through the VIRB app
VIRB 360 Action Camera, page
1 Set up the chartplotter's Wi‑Fi network
‑ Fi Wireless Network, page
Wi
2 From the VIRB camera main menu, select Wireless >
Wi-Fi > Status to turn on Wi‑Fi wireless technology.
3 Select Mode > Connect.
4 Select Add New.
The camera searches for nearby Wi‑Fi networks.
5 Select the chartplotter's Wi‑Fi network, and enter the
network password.
The app and the camera connect to the chartplotter's
Wi‑Fi network.
You can control the camera using the chartplotter.
72
WARNING
(Connecting
72).
(Connecting
72).
(Setting Up the
9).
(Connecting a
72).
(Setting Up the
9).
Controlling the VIRB Action Camera with the
Chartplotter
Before you can control a VIRB action camera with the
chartplotter, you must connect the devices using a
wireless connection.
You can connect up to five VIRB action cameras to the
chartplotter.
After you connect the VIRB action camera with the
chartplotter, a new option is added to A/V, Gauges,
Controls. You can start and stop recording on the VIRB
action camera using the chartplotter.
NOTE: The VIRB image shown on the chartplotter is a in
a lower resolution than the VIRB action camera records.
To view the high-resolution video, view the video on a
computer or television.
1 Select A/V, Gauges, Controls > VIRB®.
2 Select an option:
• To take a still photograph, select
• To begin recording, select
When recording, the remaining recording memory is
shown.
• To stop recording, select
• If you have more than one VIRB action camera
connected, use the arrows to select a different
action camera to control.
• To view stored videos or images, select
• To pan and tilt the VIRB 360, drag your finger on
the screen.
• To return the VIRB 360 view to the home position,
select .

Controlling the VIRB Action Camera Video Playback

You can view VIRB action camera video and images
using the chartplotter.
NOTE: The VIRB playback on the chartplotter is shown in
the same quality as the live view on the chartplotter. To
view the high-resolution video, view the video on a
computer or television.
1 From the VIRB® screen, select
2 Wait a few seconds for the thumbnail images to load.
3 Select a video or image.
4 Control the playback using the on-screen buttons or
menu options:
• To stop the video, select
• To pause the video, select
• To replay the video, select
• To play the video, select
• To skip ahead or back in the video, drag the slider.

Deleting a VIRB Video

You can delete a video or image from the VIRB action
camera.
1 Open the VIRB video or image to delete.
2 Select Menu > Delete File.
.
.
again.
.
.
.
.
.
.
Viewing Video