Browsing For And Navigating A Saved Route; Browsing For And Navigating Parallel To A Saved Route; Initiating A Search Pattern; Deleting A Saved Route - Garmin Volvo Penta Glass Cockpit B7 Owner's Manual

3 Select Review > Edit Route.
4 Select an option:
• To change the name, select Name, and enter the
name.
• To edit a turn from a list, select Edit Turns > Use
Turn List, and select a turn from the list.
• To select a turn using the chart, select Edit Turns >
Use Chart, and select a location on the chart.
Modifying a turn that uses a saved waypoint does not
move that waypoint, it relocates the turn in the route.
Moving the location of a waypoint used in a route does
not move the turn in the route.

Browsing for and Navigating a Saved Route

Before you can browse a list of routes and navigate to
one of them, you must create and save at least one route.
1 Select Info > User Data > Routes & Auto Guidance
Paths.
2 Select a route.
3 Select Navigate To.
4 Select an option:
• To navigate the route from the starting point used
when the route was created, select Forward.
• To navigate the route from the destination point
used when the route was created, select
Backward.
A magenta line appears. In the center of the magenta
line is a thinner purple line that represents the
corrected course from your present location to the
destination. The corrected course is dynamic, and it
moves with your boat when you are off course.
5 Review the course indicated by the magenta line.
6 Follow the magenta line along each leg in the route,
steering to avoid land, shallow water, and other
obstacles.
7 If you are off course, follow the purple line (corrected
course) to go to your destination, or steer back to the
magenta line (direct course).
Browsing for and Navigating Parallel to a Saved
Route
Before you can browse a list of routes and navigate to
one of them, you must create and save at least one route.
1 Select Info > User Data > Routes & Auto Guidance
Paths.
2 Select a route.
3 Select Navigate To.
4 Select Offset to navigate parallel to the route, offset
from it by a specific distance.
Navigation with a Chartplotter
5 Indicate how to navigate the route:
• To navigate the route from the starting point used
when the route was created, to the left of the
original route, select Forward - Port.
• To navigate the route from the starting point used
when the route was created, to the right of the
original route, select Forward - Starboard.
• To navigate the route from the destination point
used when the route was created, to the left of the
original route, select Backward - Port.
• To navigate the route from the destination point
used when the route was created, to the right of the
original route, select Backward - Starboard.
6 If necessary, select Done.
A magenta line appears. In the center of the magenta
line is a thinner purple line that represents the
corrected course from your present location to the
destination. The corrected course is dynamic, and it
moves with your boat when you are off course.
7 Review the course indicated by the magenta line.
8 Follow the magenta line along each leg in the route,
steering to avoid land, shallow water, and other
obstacles.
9 If you are off course, follow the purple line (corrected
course) to go to your destination, or steer back to the
magenta line (direct course).

Initiating a Search Pattern

You can initiate a search pattern to search an area.
Different patterns are better suited for different search
situations.
1 Select Info > User Data > Routes & Auto Guidance
Paths > New > Route Using SAR Pattern.
2 Select a pattern:
• Select Sector Search when the location of the
object is fairly known, the search area is small, and
an intensive search is needed.
• Select Expanding Square when the location of the
object is somewhat doubtful, the search area is
small, and an intensive search is needed.
• Select Creeping/Parallel Line when the location of
the object is approximate, the search area is small,
and a consistent search is needed.
3 Enter the search parameters.
4 Select Done.
5 If necessary, select Engage.

Deleting a Saved Route

1 Select Info > User Data > Routes & Auto Guidance
Paths.
2 Select a route.
3 Select Review > Delete.

Deleting All Saved Routes

Select Info > User Data > Delete User Data > Routes
& Auto Guidance Paths.
25