Garmin Volvo Penta Glass Cockpit B7 Owner's Manual page 77

Saving a Station as a Preset
1 From an applicable media screen, tune to the station
to save as a preset.
2 Select Presets > Add Current Channel.
Selecting a Preset
1 From an applicable media screen, select Presets.
2 Select a preset from the list.
3 Select Tune to Channel.
Removing a Preset
1 From an applicable media screen, select Presets.
2 Select a preset from the list.
3 Select Remove Current Channel.
DAB Playback
When you connect a compatible Digital Audio
Broadcasting (DAB) module and antenna, such as the
Fusion ® MS-DAB100A to a compatible stereo, you can
tune in to and play DAB stations
To use the DAB source, you must be in a region in which
DAB is available, and select the tuner region
DAB Tuner Region, page
Setting the DAB Tuner Region
You must select the region you are in to receive DAB
stations properly.
1 From the media screen, select Menu > Installation >
Tuner Region.
2 Select the region you are in.
Scanning for DAB Stations
NOTE: Because DAB signals are broadcast in select
countries only, you must set the tuner region to a location
where DAB signals are broadcast.
1 Select the DAB source.
2 Select Scan to scan for available DAB stations.
When scanning is complete, the first available station
in the first ensemble found begins playing.
NOTE: After the first scan is complete, you can select
Scan again to re-scan for DAB stations. When the re-
scan is complete, the system starts playing the first
station in the ensemble you were listening to when you
started the re-scan.
Changing DAB Stations
1 Select the DAB source.
2 If necessary, select Scan to scan for local DAB
stations.
3 Select or to change the station.
When you reach the end of the current ensemble, the
stereo automatically changes to the first available
station in the next ensemble.
TIP: You can hold
Media Player
(Setting the
65).
or to change the ensemble.
Selecting a DAB Station from a List
1 From the DAB media screen, select Browse >
Stations.
2 Select a station from the list.
Selecting a DAB Station from a Category
1 From the DAB media screen, select Browse >
Categories.
2 Select a category from the list.
3 Select a station from the list.
DAB Presets
You can save your favorite DAB stations as presets for
easy access.
You can save up to 15 DAB-station presets.
Saving a DAB Station as a Preset
1 From the DAB media screen, select the station to save
as a preset.
2 Select Browse > Presets > Save Current.
Selecting a DAB Preset from a List
1 From the DAB media screen, select Browse >
Presets > View Presets.
2 Select a preset from the list.
Removing DAB Presets
1 From the DAB media screen, select Browse >
Presets.
2 Select an option:
• To remove one preset, select Remove Preset, and
select the preset.
• To remove all presets, select Remove All Presets.
SiriusXM Satellite Radio
When you have a FUSION-Link
SiriusXM Connect Tuner installed and connected to the
chartplotter, you may have access to SiriusXM satellite
radio, depending on your subscription.
Locating a SiriusXM Radio ID
Before you can activate your SiriusXM subscription, you
must have the radio ID of your SiriusXM Connect Tuner.
You can locate the SiriusXM Radio ID on the back of the
SiriusXM Connect Tuner, on the back of its packaging, or
by tuning your chartplotter to channel 0.
1 Select Media > Source > SiriusXM.
2 Tune to channel 0.
The SiriusXM radio ID does not include the letters I, O,
S, or F.
Activating a SiriusXM Subscription
1 With the SiriusXM source selected, tune to channel 1.
You should be able to hear the preview channel. If not,
check the SiriusXM Connect Tuner and antenna
installation and connections, and try again.
2 Tune to channel 0 to locate the Radio ID.
capable stereo and
™
65