Linking A Layout To The Control And Joystick Buttons; Resetting The Station Layouts; Presets; Saving A New Preset - Garmin Volvo Penta Glass Cockpit B7 Owner's Manual

1 Select an option based on the type of screen you are
viewing:
• From a full screen view, select Menu > Edit
Overlays.
• From a combination screen, select Menu > Edit
Combo > Edit Overlays.
• From a SmartMode screen, select Menu > Edit
Layout.
TIP: To quickly change the data shown in an overlay
box, hold the overlay box.
2 Select an item to customize the data and data bar:
• To change the data shown in an overlay box, select
the overlay box, select the new data to show, and
select Back.
• To select the location and layout of the data overlay
bar, select Edit Layout, and select an option.
• To customize the information shown when
navigating, select Navigation, and select an option.
• To turn on other data bars, like the media controls,
select Top Bar or Bottom Bar, and select the
necessary options.
3 Select Done.

Linking a Layout to the Control and Joystick Buttons

You can link layouts to buttons on the control and joystick
buttons. When you press an assigned button, the linked
layout opens on the station screens.
1 From the Home screen, select Menu > Link Layout.
2 Select an item or button name.
3 Select Select Layout.
4 Select a layout to link to the item or button.
5 If necessary, repeat steps 2–4 for the remaining
buttons.
When you press the assigned button on the control or
joystick, the assigned layout opens on the station
screens.

Resetting the Station Layouts

You can restore the layouts in this station to the factory
default settings.
Select Settings > System > Station Information >
Reset Layouts.
6

Presets

A preset is a collection of settings that optimize the screen
or view. You can use particular presets to optimize groups
of settings for your activity. For example, some settings
might be optimal for when you are fishing, and others
might be optimal for when you are cruising. Presets are
available on some screens, such as charts, sonar views,
and radar views.
To select a preset for a compatible screen, select Menu >
, and select the preset.
When you are using a preset and you make changes to
the settings or view, you can save the changes to the
preset or create a new preset based on the new
customizations.

Saving a New Preset

After you have customized the settings and view of a
screen, you can save the customization as a new preset.
1 From a compatible screen, change the settings and
view.
2 Select Menu > > Save > New.
3 Enter a name, and select Done.
4 Select an item, and select Include to include or
exclude the item from the preset.

Managing Presets

You can customize the pre-loaded presets and edit
presets you created.
1 From a compatible screen, select Menu >
Manage.
2 Select a preset.
3 Select an option:
• To rename the preset, select Rename, enter a
name, and select Done.
• To edit the preset, select Edit, and update the
preset.
• To delete the preset, select Delete.
• To reset all presets to factory settings, select Reset
All.

Setting the Vessel Type

You can select your boat type to configure the chartplotter
settings and to use features customized for your boat
type.
1 Select Settings > My Vessel > Vessel Type.
2 Select an option.

Adjusting the Backlight

1 Select Settings > System > Display > Backlight.
2 Adjust the backlight.
TIP: From any screen, press
through the brightness levels. This can be helpful
when the brightness is so low you cannot see the
screen.
>
repeatedly to scroll
Customizing the Chartplotter