Traditional, Garmin Clearvü, And Sidevü Sonar Setup; Setting The Zoom Level On The Sonar Screen; Setting The Scroll Speed - Garmin Volvo Penta Glass Cockpit B7 Owner's Manual

works best after you have adjusted the level of detail
shown on the screen using the gain or brightness
settings.
If you want to highlight smaller fish targets or create a
higher intensity display of a target, you can increase the
color gain or contrast setting. This causes a loss in the
differentiation of the high intensity returns at the bottom. If
you want to reduce the intensity of the return, you can
reduce the color gain or contrast.
1 From a sonar view, select Menu.
2 Select an option:
• While in the Garmin ClearVü or SideVü sonar view,
select Contrast.
• While in a Panoptix LiveVü sonar view, select Color
Gain.
• While in another sonar view, select Sonar Setup >
Appearance > Color Gain.
3 Select an option:
• To increase or decrease the color intensity
manually, select Up or Down.
• To use the default setting, select Default.
Traditional, Garmin ClearVü, and SideVü
Sonar Setup
NOTE: Not all options and settings apply to all models,
sounder modules, and transducers.
NOTE: These settings do not apply to Panoptix
transducers.
From a sonar view, select Menu > Sonar Setup.
Scroll Speed: Sets the rate at which the sonar scrolls
from right to left (Setting the Scroll Speed, page
In shallow water, you can select a slower scroll speed
to extend the length of time the information is displayed
on screen. In deeper water, you can select a faster
scroll speed. Automatic scroll speed adjusts the
scrolling speed to the speed the boat is traveling.
Noise Reject: Reduces the interference and the amount
of clutter shown on the sonar screen
Rejection Settings, page
Appearance: Configures the appearance of the sonar
screen (Sonar Appearance Settings, page
Alarms: Sets sonar alarms
Advanced: Configures various sonar display and data
source settings (Advanced Sonar Settings, page
Not applicable to Garmin ClearVü or SideVü sonar
views.
Installation: Configures the transducer
Garmin ClearVü, and SideVü Transducer Installation
Settings, page 40).
38
38).
(Sonar Noise
39).
39).
(Sonar Alarms, page 40).
(Traditional,

Setting the Zoom Level on the Sonar Screen

1 From a sonar view, select Menu > Zoom >
Mode.
2 Select an option:
• To set the depth and zoom automatically, select
Auto.
If necessary, select Set Zoom to modify the zoom
setting. Select View Up or View Down to set the
depth range of the magnified area, and select Zoom
In or Zoom Out to increase or decrease the
magnification of the magnified area.
• To set the depth range of the magnified area
manually, select Manual.
If necessary, select Set Zoom to modify the zoom
setting. Select View Up or View Down to set the
depth range of the magnified area, and select Zoom
In or Zoom Out to increase or decrease the
magnification of the magnified area.
• To magnify one particular area of the screen, select
Magnify.
If necessary, select Magnify to increase or
decrease the magnification level.
TIP: You can drag the magnification box to a new
location on the screen.
• To zoom in on the sonar data from the bottom
depth, select Bottom Lock.
If necessary, select Span to adjust the depth and
placement of the bottom lock area.
To cancel the zoom, deselect the Zoom option.

Setting the Scroll Speed

You can set the rate at which the sonar image moves
across the screen. A higher scroll speed shows more
detail until there is no additional detail to show, at which
point it starts stretching out the existing detail. This can be
useful while moving or trolling, or when you are in very
deep water where the sonar is pinging very slowly. A
lower scroll speed displays sonar information on the
screen longer.
For most situations, the Default setting provides a good
balance between a quickly scrolling image and less
distorted targets.
1 From a sonar view, select Menu > Sonar Setup >
Scroll Speed.
2 Select an option:
40).
• To adjust the scroll speed automatically using
speed-over-ground or water speed data, select
Auto.
The Auto setting selects a scroll rate to match the
boat speed, so targets in the water are drawn with
the correct aspect ratio and appear less distorted.
When viewing Garmin ClearVü or SideVü sonar
views or searching for structure, it is recommend to
use the Auto setting.
• To scroll faster, select Up.
• To scroll more slowly, select Down.
>
Sonar Fishfinder