Cleaning The Stainless-Steel Frame/Control Panel; Cleaning The Knob(S) - Miele ProLine CS 1112 Operating And Installation Instructions

Cleaning and care
Cleaning the stainless-steel
frame/control panel

Risk of damage caused by
pointed objects.
The seal between the frame and the
countertop could be damaged.
Do not use pointed objects for clean-
ing.

Damage due to soiling.
Soiling, particularly salty food or liq-
uid and olive oil, can cause damage
if left on the printed surfaces for a
long time.
Remove such soiling immediately.

Damage due to incorrect clean-
ing.
Stainless-steel cleaners rub off the
printed symbols.
Do not use stainless-steel cleaners
on printed symbols.
28
 Clean the frame and the control panel
using a solution of warm water and a
small amount of liquid dish soap ap-
plied with a soft sponge. Soften any
stubborn soiling beforehand. If nec-
essary, the rough side of a kitchen
sponge can be used.
Tip: You can also use a ceramic and
stainless-steel cleaner to clean the ap-
pliance. It is recommended to use a
stainless-steel care product after clean-
ing to help keep your appliance looking
good. (See "Optional accessories".)

Cleaning the knob(s)

 Use a soft sponge, warm water, and
a small amount of liquid dish soap to
clean the knob(s). Soften any stub-
born soiling beforehand.
 Dry the knob(s) with a clean cloth.