Gas Cooktop; Dishwasher-Safe Grates; Burner Control Knobs With Stainless Steel Finish; Simmer Burner / Power Burners - Miele HR 1124 Operating Instrucitons

Cleaning and care

Gas cooktop

The surfaces of the burner
components and grates will slightly
lose their luster over time. This is
completely normal and does not
indicate damage to the material.
 Clean the cooktop after each use
with a soft sponge, warm water and a
small amount of liquid dish soap.
 Pre-soak any stubborn dirt or grime
before cleaning.
 Dry the appliance after using water to
clean it. This helps prevent lime
deposits.
Tip: Food that has cooked over onto a
hot cooktop can cause the burner
components to become discolored.
Immediately remove all spilled food and
all salt or sugar splatters!

Dishwasher-safe grates

 Remove the burner grates.
 Clean the grates in the dishwasher or
using a soft sponge with warm water
and a small amount of liquid dish
soap.
 If necessary, the rough side of a
kitchen sponge can be used.
50
Burner control knobs with stainless
steel finish
The burner control knobs may
become discolored if they are not
cleaned regularly.
Do not clean the burner control
knobs in a dishwasher or with a
stainless steel cleaner.
Clean the knobs with a soft sponge,
warm water and a small amount of
liquid dish soap.

Simmer burner / Power burners

The burner cap is not dishwasher-
safe.
Make sure that the flame holes are
completely dry after cleaning.
 Remove the burner cap.
 Clean the burner cap using a soft
sponge, warm water and a small
amount of liquid dish soap.
 All parts of the burner which cannot
be removed should be wiped down
with a damp cloth.
Ignitor
Do not allow the ignitor to become
wet. If it is wet, it will not spark.
 Gently wipe down the ignitor clean
using a damp cloth.