Installation; Important Safety Instructions - Installation - Miele ProLine CS 1112 Operating And Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION


Risk of damage caused by incorrect installation.
Incorrect installation can cause damage to the ProLine element.
The ProLine element must only be installed by a qualified person.

Damage from falling objects.
Take care not to damage the ProLine element when installing upper cabinets or
a ventilation hood above it.
Install the upper cabinets and ventilation hood before installing the ProLine ele-
ment.

Reaching over a hot appliance to access the cabinets can result in
burns. You can reduce the risk of burns by installing a ventilation
hood that extends at least 5" (12 cm) past the bottom of the cabi-
nets.

The countertop must be heat-resistant (up to 212°F / 100°C), so
that it does not become deformed or the veneer detached. The wall
strips must be heat-resistant as well.

​ ​ T he ProLine element must not be installed above refrigerators/
freezers, dishwashers, or washers/dryers.

When installing the ProLine element, make sure that the power
cord cannot come into contact with hot appliance parts.

When installing the ProLine element, make sure that the power
cord cannot come into contact with any moving kitchen parts (e.g., a
drawer), and cannot become trapped.

Observe carefully the safety clearances listed on the following
pages.

Installation

33