Appendix A - Specifications - ADC HiGain ELU-319 5E User Manual

Appendix A - Specifications

A
PPENDIX
HDSL Line Code
HDSL Output
Maximum Provisioning Loss
Line Clock rate
HDSL Start-up Time
One-way G.703 Delay
G.703 Line Impedance
G.703 Pulse Output
G.703 Input Level
G.703 Line Rate
G.703 Line Format
G.703 Frame Format
Maximum Heat Dissipation
Fusing
HDSL Span Voltage
Margin Indicator
Electrical Protection
Operating Temperature
Operating Humidity
Mounting
Dimensions
Height:
Width:
Depth:
Weight:
Wander (Looped)
WB Jitter (Looped)
NB Jitter (Looped)
44
A - S
PECIFICATIONS
1040 kbps 2B1Q full duplex
+13.5 dBm ±0.5 dB at 135 W
35 dB at 260 kHz, 135 W
Internal "Stratum 4" clock
30 seconds (typical), 60 seconds (maximum) per span
<200 µs per span without doublers; doubler delay <80 µs
75 W (List 5E), 120 W (List 6E)
2.3 V ± 10% (@ 75 W), 2.7 V ± 10% (@120 W)
+1.5 to -7.5 dBDSX
2.048 Mbps ±200 bps
HDB3
Unframed only
5 W (without doubler), 7 W (with doubler) typical
Internal; connected to "FUSE ALARM" output on pin H
-140 Vdc to ± 112 Vdc
Displays HDSL span SNR margin for both HDSL spans relative to 10
Secondary surge and power cross protection on HDSL ports; requires external
primary protection
-40 °F to +158 °F (-40 °C to +70 °C)
5% to 95% (non-condensing)
STS high-density slot
4.75 in (12.1 cm)
0.625 in (1.59 cm)
10 in (25.4 cm)
8 oz (.23 kg)
0.3 UI maximum (1 UI = 648 ns)
0.2 UI maximum
0.1 UI maximum
January 26, 2000
150-319-205-05, Issue 5
-7
BER operation
ELU-319 List 5E and List 6E