View Span Status; Maintenance Terminal Main Menu - ADC HiGain ELU-319 5E User Manual

Maintenance
HI-GAIN ELU-319
Screen

View Span Status

Set Clock
System Settings
Loopback Menu
View Performance Data
View Performance History
View Alarm History
View System Inventory
V S S
IEW PAN TATUS
The View Span Status option allows you to view five system status screens that provide information about the
HDSL Loop 1, HDSL Loop 2, and the G.703. For doubler applications, the available Span Status screens depend
on whether the system includes one, two, or three doublers.
20

MAINTENANCE TERMINAL MAIN MENU

CIRCUIT ID#:
A. VIEW SPAN STATUS
B. SET CLOCK
C. SYSTEM SETTINGS
D. LOOPBACK MODE:
E. VIEW PERFORMANCE DATA
F. VIEW PERFORMANCE HISTORY
G. VIEW ALARM HISTORY
H. VIEW SYSTEM INVENTORY
Figure 6. Maintenance Terminal Main Menu
Table 12. Maintenance Terminal Screens
Function
Provides access to subscreens that allow you to monitor the HDSL
line between the ELU, EDU, and ERU.
Allows you to set both the time and the date parameters at the ELU,
and to update the same settings at the ERU.
Allows you to set all user options.
Provides access to subscreens that allow you to issue and disable
loopbacks from both the network and customer side.
Provides access to subscreens that allow you to view the Errored
Seconds (ES) and Unavailable Seconds (UAS) between the ELU, EDU,
and ERU in 15-minute intervals over a 4-hour time period.
Provides access to subscreens that allow you to view the ES and UAS
between the ELU, EDU, and ERU in 24-hour intervals over a
7-day period.
Provides access to subscreens that allow you to view alarm
conditions between the ELU and the ERU.
Allows you to enter a unique circuit ID (up to 24 characters).
January 26, 2000
(ver V5.4L-5E)
NONE
150-319-205-05, Issue 5
See page:
20
26
27
29
32
35
37
40
ELU-319 List 5E and List 6E