Table of Contents
Advertisement
Maintenance
S
C
ET
LOCK
Press
from the Maintenance Terminal Main Menu to open the Set Clock screen
B
TIME: 00:14:33
DATE: 01/24/00
CIRCUIT ID#:
Format: HH:MM
MM/DD/YY
NEW TIME:
NEW DATE:
(U)PDATE REMOTE?
All time information is lost when power is removed. The last date, however, is retained in
NVRAM and reappears when power is restored.
Set Time
The cursor defaults to the New Time field. To set the system time, type the hour and minute in the 24-hour format
of hh:mm:ss (setting the seconds is optional), then press
Set Date
To set the system date, type the month, day and year in a mm/dd/yy format, then press
Remote field displays.
When editing entries in the Clock screen and when using the Terminal emulation program in
Windows 3.1, pressing the
Update the ERU Time and Date
The remote unit date and time is set by using this option. To update the remote, do one of the following:
•
Press
to update the ERU to the same date and time set for the ELU-319 List 5E and List 6E.
U
•
Press
to not update.
ENTER
26
SET CLOCK
Figure 11. Set Clock Screen
ENTER
key deletes two characters instead of just one.
BACKSPACE
January 26, 2000
(Figure
11).
. The New Date field displays.
ENTER
ELU-319 List 5E and List 6E
150-319-205-05, Issue 5
. The Update
Advertisement
Table of Contents
