Avtech Room Alert 3 Wi-Fi User's Manual & Reference Manual page 21

 Select
wlan0
To configure your wireless network settings on the "Network" page, select
Configuration. You may set a static IP address for your Room Alert 3 Wi-Fi by following the
steps below:
1. In "State," leave the default,
2. In "DHCP Client," select Disabled.
3. In "IP Address," enter the static IP. In this example, the static IP is 192.168.1.99.
4. In "Default Gateway," enter the default gateway. In this example, the default gateway is
192.168.1.1.
AVTECH Software, Inc.
Link + Status:
+
Enabled selected.
Room Alert 3 Wi-Fi
wlan0 + Interface +
17