Settings; Quickconnect; Status - Avtech Room Alert 3 Wi-Fi User's Manual & Reference Manual

1. To hide the disconnected digital sensor, click
Sensors Status Bar as shown here.
2. To toggle the view back to all 3 sensor channels, click

Settings

QuickConnect

Settings
Navigate to
You may select the wireless network you wish to connect the Room Alert 3 Wi-Fi to in this
page.
For instructions, please refer back to
network in this manual.

Status

Settings
Navigate to
Here you may see the device's current network information, such as its current IP address,
default gateway and domain name server (DNS).
AVTECH Software, Inc.

QuickConnect
to open the QuickConnect screen.
Step 2C Connect the Room Alert 3 Wi-Fi to your wireless

Status
to open the WLAN Status screen.
Connected Sensors
All Sensors.
Room Alert 3 Wi-Fi
in the Current
15