Connect The Room Alert 3 Wi-Fi To Your Wireless Network - Avtech Room Alert 3 Wi-Fi User's Manual & Reference Manual

Room Alert 3 Wi-Fi
C. Connect The Room Alert 3 Wi-Fi To Your Wireless Network
Once you are in the Room Alert 3 Wi-Fi's interface, navigate to
SettingsQuickConnect
 In "Network Name," select your Wifi network's network name (also called its SSID)
from the list of networks.
In this example, we are choosing "Example-Wireless-Network."
TIP
 A "WLAN Profile" for your network will automatically appear. Options on this menu
vary depending your Wi-Fi network's security.
o If you are required to, enter your Wi-Fi network's password in the Password
field.
o Select
8
in order to configure the device to use your wireless network.
If your wireless network's name is hidden, type it (with correct
capitalization) in the "Network name" field shown above; then
select it when it appears in the list.
Apply
to temporarily save your changes.
AVTECH Software, Inc.